Auger Drive Excavator 10t-20t

Features

  • Compact high torque Digga manufactured gearbox
  • Highly efficient design with less moving parts
  • Fitted with Eaton/Digga geroler hydraulic motor
  • No case drain required
  • Full range of shafts available upon request
  • Extreme duty shaft locking system
  • Drive fits down the hole for greater digging depth
  • Low maintenance with 5yr gear box and 3yr motor warranty
  PD12 PD15 PD18
REC FLOW RANGE 120-230 LPM 120-230 LPM 120-230 LPM
MAX TORQUE 11268 NM 13897 NM 17603 NM
PRESSURE VALVE FITTED INCLUDED INCLUDED INCLUDED
MAX PRESSURE
DO NOT EXCEED		 240 BAR @ 130 LPM
MAX FLOW
DO NOT EXCEED		 230 LPM @ 130 BAR 210 LPM @ 145 BAR 230 LPM @ 130 BAR
MAX POWER
DO NOT EXCEED		 50 KW (67 HP)
OVERALL LENGTH 950 MM 1006 MM 1006 MM
DIAMETER 290 MM 290 MM 290 MM
WEIGHT
NO FRAME / HITCH		 149 KG 176 KG 176 KG
STD OUTPUT SHAFT 75 MM SQUARE 75 MM SQUARE 75 MM SQUARE
SWING CONTROL OPTIONAL OPTIONAL OPTIONAL
DIGGALIGN OPTIONAL OPTIONAL OPTIONAL
REC AUGER A8 / RC8 A8 / RC8 A8 / RC8
MAX AUGER DIA CLAY/SHALE* 1200 MM 1200 MM 1500 MM
MAX AUGER DIA EARTH* 1600 MM 1600 MM 1600 MM

(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.

 

  PD22 PD25
REC FLOW RANGE 120-230 LPM 120-230 LPM
MAX TORQUE 22142 NM 26267 NM
PRESSURE VALVE FITTED INCLUDED INCLUDED
MAX PRESSURE
DO NOT EXCEED		 240 BAR @ 130 LPM
MAX FLOW
DO NOT EXCEED		 230 LPM @ 130 BAR
MAX POWER
DO NOT EXCEED		 50 KW (67 HP)
OVERALL LENGTH 1006 MM 1152 MM
DIAMETER 290 MM 355 MM
WEIGHT
NO FRAME / HITCH		 176 KG 300 KG
STD OUTPUT SHAFT 75 MM SQUARE 100 MM SQUARE
SWING CONTROL OPTIONAL OPTIONAL
DIGGALIGN OPTIONAL OPTIONAL
REC AUGER A8 / RC8 RC10 / RC11
MAX AUGER DIA CLAY/SHALE* 1500 MM 1500 MM
MAX AUGER DIA EARTH* 1600 MM 1800 MM

(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.